TC Electronic DB6 User Manual Download Page 84

Page: 84 / 174

Updating DB6 firmware

DB6 English Manual (2014-10-07) 81

Finding and installing DB6

firmware – Microsoft Windows

You can download the latest version of the DB6
firmware from:

tcelectronic.com/support/software/

►

On this page, locate the “DB6” section.

►

In this section of the support page, look for
“Firmware” and click the button representing
the latest version of the DB6 firmware.

Depending on your browser type and con-

figuration, a dialog may be shown asking you
what you want to do with this file.

Choose “Save”.

The software will be downloaded to your

browser’s default download location. Usually,
this is the “Downloads” folder for your user
account.

►

In Windows Explorer, navigate to the folder
containing the ZIP file you just downloaded.

►

Right-click the ZIP file and choose “Extract
All…“ from the context menu.

A dialog box will allow you to specify where

the extracted files should be stored.

Summary of Contents for DB6















































































































































































Search results

Summary of Contents for DB6

Reviews:

Related manuals for DB6

Brands by name

Popular brands

TC Electronic DB6, User Manual

Search results

Summary of Contents for DB6

Reviews:

Related manuals for DB6

Brands by name

Popular brands