TC Electronic DB6, User Manual

Page: 77 / 174

Recalling, storing and deleting settings
DB6 English Manual (2014-10-07) 74
Library – Recall page
Fig. 32.: Library – Recall Scene page
Use the Library Recall page of the TC Icon soft-
ware to recall (load) previously stored settings
into the memory of the currently selected device.
All colored buttons and selected items on the
Recall page are colored in green.
To access the Library Recall page:
► If it isn’t already, select the device you want
to control using the Select page – see “TC
Icon modes: Base and Device operation” on
page 41.
► Select the “Library” tab.
►
Select the “Recall” page.
►
Select the subpage for the setting type you
want to access:
– Scene – to recall a Scene preset
– Route – to recall a Routing preset.
– E(ngine) 1 or E(ngine) 2 – to recall an En-
gine preset and use it for the currently se-
lected Engine.
– M(eter) 1 or M(eter) 2 – to recall a Meter
preset and use it for the currently selected
Loudness Meter.
►
Select between Factory and User preset
groups by clicking the Factory or User button.
There are 8 Factory and 8 User preset groups,
with each group holding up to 8 presets.
►
Select a preset you want to use.
► Click the large “Recall (Scene / Route / En-
gine / Meter) Preset” button in the upper right
corner to recall (activate) the selected preset.
The selected preset will be recalled.
Preset information
For many presets, additional information is
stored as part of the preset. When you select
such a preset, an inverted “Info” tag will appear
at the bottom of the large Preset Recall button.
Fig. 33.: Info tag in the Preset Recall button
► Click the Info tag to display additional infor-
mation about this preset in a modal dialog.
►
Click the OK button do close the dialog.