TC Electronic DB6, User Manual

Page: 68 / 174

DB6 remote control
DB6 English Manual (2014-10-07) 65
For information on voltage windows and GPI
circuits, see “Appendix 2: DB6 GPI/O page” on
page 161.
GPI 3 – Resetting section
GPI can also be used to reset the history of the
DB6. When GPI is controlling the DB6, blue LEDs
on the affected Reset buttons on the respective
Meter pages indicate that they are being remote-
controlled.
As opposed to the GPI 1 and 2 inputs, the GPI
3 input is a “momentary type”, catching a pulse
and not receiving fixed-state, latching signals.
Enable button
Use this button to enable GPI 3 input for reset-
ting metering history.
A “GPI” button that controls the same function
can be found on the Remote – Master page in
the Resetting section.
Function parameter
Use the Function parameter to define the history
files that should be reset when a Reset is trig-
gered.
Off setting
No Reset will occur.
Metering setting
GPI will reset the Loudness meter history and
log file.
Processing setting
With aNorm loudness processing, GPI will reset
processing history.
All
With aNorm loudness processing, GPI will reset
both processing history and loudness Meter his-
tory and log file.
Engines parameter
Settings: M1, M2, M1 & M2
Use the Engine parameter to specify the Engines
whose meters should be affected when a Reset
is being performed.
Status field
“-“ display
GPI 3 is disabled.
“Idle” display
Displayed when the device is waiting for a GPI
reset pulse.
“Reset” display
“Reset” will be displayed for 1 second when a
GPI pulse has been received. Simultaneously,
the affected Reset buttons will light up yellow for
1 second on the respective Meters that are being
remote-controlled.