TC Electronic DB6, User Manual

Page: 120 / 174

Loudness Wizard 2
DB6 English Manual (2014-10-07) 117
Processing section
Format Convert parameter
Use the Format Convert parameter to specify if
and how the signal being processed should be
converted.
Off setting
To disable Format conversion, set the Format
Convert parameter to Off.
UpCon setting
To automatically upconvert a stereo signal re-
ceived at the input to 5.1, set the Format Convert
parameter to UpCon.
If you set the Format Convert parameter to Up-
Con and the input format is already 5.1, the sig-
nal is passed to LWiz2’s ALC module without
format conversion.
Downmix setting
To automatically downmix a 5.1 signal received
at the input to stereo, set the Format Convert
parameter to Downmix.
If you set the Format Convert parameter to
Downmix and the input format is stereo, the sig-
nal is passed to Loudness Wizard’s ALC module
without format conversion.
Loudness Correct parameter
Use the Loudness Correct parameter to specify
to which signal component (if any) Loudness
adjustment should be applied. Please note that
this setting is independent from format conver-
sion as specified using the Format Convert pa-
rameter.
All setting
To apply Loudness adjustment to all compo-
nents of the input signal, set Loudness Correct
to All.
Stereo only setting
To apply Loudness adjustment only to the Ste-
reo component of the input signal, set Loudness
Correct to Stereo only.
5.1 only setting
To apply Loudness adjustment only to the 5.1
component of the input signal, set the Loudness
Correct to 5.1 only.
Delay section
Audio Delay parameter
Use the Audio Delay parameter to adjust AV
sync. You can change this parameter in real-time
without introducing clicks or pitch changes.
Setting the Audio Delay parameter to “0” results
in minimum latency (around 1 ms). The maximum
value for the Audio Delay parameter is 10 sec-
onds delay for each channel in a 5.1 stem.
If Audio Delay is enabled, some or all of it may
also serve as loudness control look-ahead.
Delay Unit parameter
Use the Delay Unit parameter to set the display
unit for the Audio Delay and Delay Unit param-
eters.
Total Delay display
The Total display shows the total delay resulting
from the user-defined Audio Delay setting and
the delay resulting from signal processing.