20 |
P a g e
G e n e r a l D a t a H e a l t h c a r e , I n c .
•
To obtain optimum quality sections, the following factors need to be taken into consideration:
a.
The hardness of the specimen
b.
The angle of the cutting blade
c.
The blade is clamped tightly
d.
The specimen is clamped tightly.
•
To obtain a quality section, first adjust the proper angle of the cutting blade and the specimen:
a.
The smaller the angle, the less the section will be compressed.
b.
The harder the specimen, the larger the angle will be needed.
c.
If the section is not good, try increasing the angle from zero.
When finished sectioning, turn the handwheel until the specimen is in the upper most
position, lock the handwheel, remove and safely dispose of the blade.
Summary of Contents for SHURCut 2500
Page 2: ......
