17 |
P a g e
G e n e r a l D a t a H e a l t h c a r e , I n c .
Specimen Clamping System
•
To actuate the
specimen holding arm
(1), rotate the
handwheel
(2) clockwise.
•
The specimen clamping system comes with two separate
clamps:
o
Quick Release Clamp (5):
Dimension of Specimen:
40mm x 50mm x 30mm or the standard
cassette size.
o
C-Type Clamp (6) (Optional Accessory):
Dimension of Specimen:
Accepts standard cassette size as well as any
specimen carrier that is less than 40mm in
length/width. The clamp will also accept
carriers as small as 12mm in length/width.
•
The
clamps
(5 or 6) attach to a
connector
(4) which
attaches itself to the
adjuster
(3).
•
To attach a clamp, first attach the
connector
(4) to the
adjuster
(3) using four screws. Then attach either the
Quick Release Clamp
using two screws or the
C-Type
Clamp
using four screws.
•
The specimen clamp adjustor allows for the specimen to
be swiveled in the horizontal and vertical direction:
o
Horizontal orientation: ± 8°
o
Vertical orientation
：
±
8
°
•
To make an adjustment, first loosen the
lever
(7). Next,
you are able to either adjust the vertical orientation using
the
knob
on top (8) or the horizontal orientation using the
knob
of the right side (9). After the adjustments are made,
retighten the
lever
(7).
1
2
6
4
5
3
8
7
9
Summary of Contents for SHURCut 2500
Page 2: ......
