tBPC oCare Pro100, Instructions For Use Manual

Page: 8 / 96

oCare
TM
Pro 100
8
against harmful interference in a typical medical
installation. However, because of the proliferation of
radio-frequency transmitting equipment and other sources
of electrical noise in healthcare and other environments, it
is possible that high levels of such interference due to
close proximity or strength of a source might disrupt the
performance of this device. Medical electrical equipment
needs special precautions regarding EMC, and all
equipment must be installed and put into service
according to the EMC information specified in this
manual.
15. During measurement, do not take off the device and apply
the sensor port (the bottom of the watch case) to the eye to
avoid the potential eye damage.
16. Do not use this device in a Magnetic Resonance (MR)
environment.
17. This device is not defibrillation proof per IEC 60601-1.
18. Do not use the pulse oximeter in the presence of
flammable anesthetics or other flammable substance in
combination with air, oxygen-enriched environments, or
nitrous oxide.
Cautions
1. If this device fails to respond as described, refer to