Taiwan Biophotonic Corporation
45
turns off the BLUETOOTH
®
radio
Watch Mode
Watch Mode is the home screen of the device with watch
functionality.
1
To check the Time or Date, press any
button once to wake up from the Sleep
Mode.
2
If no button is pressed in designated
time, the device enters Sleep Mode.
3
Press
SWITCH
button
once
to
enter
the
Measurement Mode whenever needed.
Measurement Mode
The mode is for the monitoring of Pulse Rate (PR) and blood
oxygen saturation (SpO
2
). Make sure the device is worn
properly, as illustrated in
Figure 8,
before starting the
measurement.
1
Press SWITCH button once to enter the Measurement
Mode (from Watch Mode).
2
Two available options in the Measurement Mode:
Summary of Contents for oCare Pro100
