tBPC oCare Pro100, Instructions For Use Manual

Page: 69 / 96

Taiwan Biophotonic Corporation
69
message shown incorrectly watchband position
slightly above the
wrist bone or ulnar
styloid processus
as
illustrated in Figure
8, and make sure the
device fit closely but
comfortably on the
wrist.
Caution
message shown Hardware
malfunction
detected Press ENTER
buttons for 3
seconds to shut
down the device. If
the error message
persists after reboot,
contact local
distributor for
assistance.
Device is not
responding Software
malfunction
occurred Press SWITCH and
ENTER buttons for
10 seconds to reboot
the device.
Device can’t
activate
Battery is depleted Charge the device as
illustrated in Figure
3. If the device still
can’t be activated
after charging,
contact local