tBPC oCare Pro100, Instructions For Use Manual

Page: 34 / 96

oCare
TM
Pro 100
34
NOTE:
1. If you are charging the device for the first time, make sure
you charge it for at least 3 hours.
2. This product should not be used in a environment that would
cause the electromagnetic interference.
3. During charging, the measurement and BLUETOOTH ®
radio is disabled for safety consideration.
4. The PR/SpO2 sensor of this product may be flashing during
charging when this product is hit by environmental ESD.
This is an ESD self-protection of the product and oCare
TM
Pro 100 will not affect its intended function. The user does
not need to concern about it.
5. The power adaptor may be affected by the surge current
during the charging of oCare Pro 100. Hence, the charging
icon on the screen may be turned off within seconds and on
again. The percentage of battery power indicated on the
screen may be also slightly changed and returned its
indicated value. These situations will be automatically
disappear in about one second and do not raise any safety
issue. The user does not need to concern about it.