Kinergier pro bi-directional inverter User Manual
TBB Power Co., Ltd
Disclaimer
Unless specially agreed in writing, TBB Power Co., Ltd
Take no warranty as to the accuracy, sufficiency of suitability of any technical or other
information provided in this manual or other documentation.
Assumes no responsibility or liability for loss or damage, whether direct, indirect,
consequential or incidental, which might arise out of the use of such information.
TBB offer standard warranty with its products, taking no responsibility for direct or indirect
loss due to equipment failure.
About this Manual
This manual describes our product features and provides procedure of installations. This manual
is for anyone intending to install our equipment.
General Instruction
Thanks for choosing our products and this manual were suitable for Kinergier pro bi-directional
inverter.
This chapter contains important safety and operation instructions. Read and keep this User
Guide well for later reference.
The Kinergier pro bi-directional inverter needs to be installed by professionals and please pay
attention to the following points prior to installation:
1> Please check the input voltage or voltage of battery is same to the nominal input voltage of
this inverter.
2> Please connect positive terminal “+” of battery to “+” input of the inverter.
3> Please connect negative terminal “-” of battery to “-” input of the inverter.
4> Please use the shortest cable to connect and ensure the secure connection.
5> While connecting, please secure the connection and avoid short cut between positive
terminal and negative terminal of battery, which will cause damage of battery.
6> Inverter will have high voltage inside. Only authorized electrician can open the case.
7> The inverter WAS NOT designed to use in any life retaining equipment.
