Kinergier pro bi-directional inverter User Manual
TBB Power Co., Ltd
28
6.6.2
6.6.2
Parameter
Parameter
s
s
et
et
>Parameter Set
A password is required to enter the parameter setting interface. The default is
1234, and the password can be set. This menu contains the following settings
submenus:
>Para_System
Display
Setting range
Description
Parallel_Syetem
1-Parallel; 0-Single
Set the unit's in single or
parallel system
Parallel_UVW
1-U/2-V/3-W
Set the unit's phase
Parallel_Address
1~8
Set the unit's parallel
address
Common_BAT_SYS
1- Common
battery
pack
system;
0- Distributed Battery Pack
System
Set the system's battery
pack mode
>Para_Mode
Display
Setting range
Description
Common_N_Line
1- Input and output netural
lines are connected
together
0- The input and output
netural lines are not
connected
Input and output
Netural line setting
GND_Connect_EN
1- Neutral grounding is
enable
0- Neutral grounding is
disable
Set
the
netural
line
grounding mode when
battery invert and AC in
disconnect
OutCtrl_CHG
1- Charge is controlled by
LCD
0- Charge is controlled by
MCU
Charge
control
mode
(read only)
