Taymor CONCIERGE 100 User Manual Download

Page: 33 / 33

Taymor’s CONCIERGE 100 PROFESSIONAL SERIES ELECTRONIC DEADBOLT is manufactured

under the highest standards of quality and workmanship. Taymor Locks are warranted to be

free from finish defects for 5 (five) years and free from mechanical, material and workmanship

defects to the original consumer purchaser for the life of the product as long as the original

owner owns his/her home. Taymor will replace free of charge, during the warranty period,

any part that fails to meet the warranty under normal installation and use as long as the

product has been cared for according to the care instructions listed in the package and on

the website. Electronic components of this lock are limited to 1 (one) year from the date of

purchase.

For more details see www.taymor.com

CONCIERGE 100

PROFESSIONAL SERIES

ELECTRONIC DEADBOLT

WARRANTY

® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.

Summary of Contents for CONCIERGE 100


































Search results

Summary of Contents for CONCIERGE 100

Reviews:

Related manuals for CONCIERGE 100

Brands by name

Popular brands

Taymor CONCIERGE 100, User Manual

Search results

Summary of Contents for CONCIERGE 100

Reviews:

Related manuals for CONCIERGE 100

Brands by name

Popular brands