28
® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.
QUESTIONS
ANSWERS
A. I’m not able to change
the programming code.
1. Make sure that every programming step is completed in under 6
seconds.
B. What type of batteries
do you recommend?
1. For best results, please use new non-rechargeable alkaline batter-
ies. (4 - AA 1.5V)
C. How long will the lock
operate on one set of
batteries?
1. Based on 15 operations per day, a single set of alkaline batteries
will operate the lockset for over a year.
TROUBLESHOOTING GUIDE
- INSTALLATION
QUESTIONS
ANSWERS
A. I just completed the
installation, but am
unable to operate it
manually. What should
I do?
1. Check the alignment between the strike hole and the latch to ensure
there is unobstructed movement of the latchbolt.
2. Make sure the torque blade is properly inserted into the latch hub in
a horizontal position.
3. Repeat the Automatic Bolt Direction routine (see page 17).
B. Sometimes when I
operate the lock
manually I “feel” a
bump while turning the
thumbturn or key.
1. The electromechanical components of the lockset are out of sync.
To re-synchronize the system please “lock” and then “unlock” the
deadbolt using the keypad.
C. In am pressing any
button on the keypad
and it doesn’t seem to
respond at all.
1. Check to see if the batteries are properly installed.
2. Re-install new batteries if the “Low Battery Warning” is on.
3. Check for proper connection between the IC wires.