34
Controls and Systems
Model SB25
Main Power Wiring Harness
______________________________
The main power wiring harness provides power to
the main control PCB.
To replace the main wiring harness, perform the
following steps.
1.
Turn off the main power to the unit.
2.
Disconnect the power adaptor from the main
power jack.
3.
Remove the bottom cover.
4.
Remove the power cover by removing the
screw.
Figure 49
5.
Disconnect the wiring harness from the PC
board.
Figure 50
6.
Remove the main power jack from the Rinse
Station base.
Figure 51
7.
Remove the main power switch and pull the
wiring harness out through the main power
switch hole.
8.
Reverse the process to replace the wiring
harness.
