25
Model C043
Operating Procedures
150629
Step 7
Close the dipping cabinet cover.
Step 8
Prepare a squeeze bottle of approved 100 PPM
sanitizing solution. Squeeze the sanitizing solution
around the draw arm plate and stud nuts to remove
any left-over product. If necessary, brush clean the
area with the door spout brush and rinse with the
sanitizing solution.
Figure 47
Step 9
Repeat these steps for the remaining freezing
cylinders.
Resuming Production During
Operation
Step 1
Place the beater switch in the ON position.
Figure 48
Step 2
Place the refrigeration switch in the ON position.
Figure 49
