28
Model C043
Operating Procedures
150629
Step 5
Open the draw arm plate and turn the flow
adjustment knob to “5”. Run the remaining mix
through the freezing cylinder and properly dispose of
the mix.
Figure 58
Note: If local health codes permit the use of
rerun
, place a sanitized, NSF approved rerun
container beneath the opening of the front plate and
run the remaining mix into the container. See
page 36 for instructions regarding the proper use of
rerun.
Step 6
After all the custard has drained from the hopper,
remove the hopper cover, the flow control rod and
the feed tube.
Figure 59
Step 7
Repeat these steps for the remaining freezing
cylinders.
Rinsing
Step 1
Place the hopper refrigeration switch in the OFF
position.
Figure 60
Step 2
Make sure the refrigeration switch is in the OFF
position.
Figure 61
