19
Model C043
Operating Procedures
150629
Step 7
Place an empty pail under the draw arm plate (if the
unit is not equipped with a trough).
Figure 23
Step 8
Pour the sanitizing solution into the hopper.
Figure 24
Step 9
Brush clean the mix hopper.
Figure 25
Step 10
Place the beater switch in the ON position and set
the timer for five minutes.
Figure 26
Step 11
After five minutes have elapsed, open the draw arm
plate and drain the sanitizer into the empty pail.
Note:
If your unit is equipped with a trough, drain
the sanitizer into the trough.
Step 12
Place the beater switch in the OFF position and the
flow adjustment knob in the CLOSE position.
Figure 27
