CONTROLS
2-3
Models C712/C713
Controls
2
Figure 2-4
Power Switch OFF
After the safety timeout has been completed and the
power switch is OFF, the following screen is displayed.
Figure 2-5
Power Switch ON
When the power switch is placed in the ON position, the
control panel buttons become operative. The LCD will be
either blank or indicate that the machine has been
cleaned.
Figure 2-6
Manager's Menu
The Manager's Menu is used to enter the operator
function displays. To access the Manager's Menu, press
the center of the Service Menu button
on the control
panel on the right side of the machine. The arrow
buttons, the SEL button, and the Service Menu
button
will be illuminated when the ACCESS CODE
screen is displayed.
Figure 2-7
In the Menu program, the arrow buttons and the SEL
button will function as menu buttons.
•
UP ARROW—
increases the value above the
cursor and is used to scroll upward in text
displays.
•
DOWN ARROW—
decreases the value above
the cursor and is used to scroll downward in text
displays.
•
SEL
—advances the cursor position to the right
and is used to select menu options.
There is a 2 minute time-out in effect during the
Manager's Menu. While in the Manager's Menu, if no
activity occurs within a 2-minute period, the display will
exit the Manager's Menu.
Note:
The unit will continue operation in the mode it
was in when the Manager's Menu was selected.
However, the control buttons will not illuminate and are
non-functional when the Manager's Menu is displayed.
Entering Access Code
With the ACCESS CODE screen on the display, use the
SEL button to set the first code number in the cursor
position. When the correct number is selected, press the
SEL button to move the cursor to the next number
position.
Figure 2-8
SAFETY TIMEOUT
ANY KEY ABORTS
POWER SWITCH OFF
Ŧ
=
Ŧ
=
Ŧ
=
Ŧ
=
Ŧ
=
Ŧ
UNIT CLEANED
UNIT CLEANED
13398BR
ENTER ACCESS CODE
8
3
0
9
__
Summary of Contents for C712
