41
Model C606
Important: To the Operator
120515
The
SET CLOCK
option allows the Manager to
adjust the control clock date and time. The date and
time may only be changed after the freezer has
been manually cleaned but before it has been
placed in the AUTO or STANDBY mode. The
following message will be displayed if the SET
CLOCK option is selected when the machine is not
in a brush clean state. (See Figure 55.)
SET CLOCK
08:00
05/15/2012
NO CHANGES ALLOWED
Press Any Key
Figure 55
To change the date or time, select the SET CLOCK
option in the menu. Touch the AUTO symbol
to
advance the arrow from Exit to Change, then touch
the CALIBRATION symbol
to select the Change
option. (See Figure 56.)
SET CLOCK
08:00
05/15/2012
Change
> Exit
Figure 56
Change the time by touching the AUTO
or
OPTIONAL FLAVOR symbol
with the cursor
under the hour position. Move the cursor to the
minutes by selecting the CALIBRATION symbol
.
Once the correct minutes are entered, select the
CALIBRATION symbol
to advance the cursor to
the month. (See Figure 57.)
SET CLOCK
08:00
05/15/2012
> Exit
Figure 57
Enter the correct month, day, and year. Then select
the CALIBRATION symbol
to advance to the
DAYLIGHT SAVING TIME screen. (See Figure 58.)
DAYLIGHT SAVING TIME
ENABLED
>
Enable
Disable
Figure 58
To Disable the Daylight Saving Time feature, select
the AUTO symbol
to move the arrow to “Disable”.
Touch the CALIBRATION symbol
to save the
selection.
To enable the Daylight Saving Time feature, select
the AUTO symbol
to move the arrow to “Enable”.
Touch the CALIBRATION symbol
to save the
selection.
The Daylight Saving Time feature, when enabled,
will automatically adjust the control clock for Daylight
Saving Time. Change the month and week for
Daylight Savings Time by selecting the AUTO
symbol
to advance the arrow from “Exit” to
“Change”. Touch the CALIBRATION symbol
to
select the Change option and move to the next
screen. (See Figure 59.)
MAR SECOND SUNDAY
NOV FIRST SUNDAY
Change
>
Exit
Figure 59
Use the arrow keys to scroll to the appropriate
month. Touch the CALIBRATION symbol
to
accept the selection. (See Figure 60.)
DST START MONTH
JAN
FEB
>
MAR
Figure 60
Summary of Contents for C606
Page 6: ...Table of Contents Model C606 Notes ...
Page 16: ...10 Model C606 Operator Parts Identification 140624 Front View Figure 2 ...
Page 26: ...20 Model C606 Operator Parts Identification 140624 Accessories Figure 11 ...
Page 30: ...24 Model C606 Operator Parts Identification Beater Door Assembly Shake Side Figure 14 ...