6
OPERATING PROCEDURES
6-2
Model 0738
Operating Procedures
Freezer Door Assembly
1. Place the door O-ring into the groove on the
back of the freezer door.
2. Slide the two O-rings into the grooves on the
draw valve and lubricate them.
3. Lightly lubricate the inside of the top of the
freezer door valve cavity.
4. Insert the draw valve from the top, with the
flat part facing toward the machine.
Note: If the draw valve is inserted with the
flat surface facing the user, this will prevent
the machine from operating.
5. Insert the counter-beater on the rear pin on
the freezer door and rotate it until the pins
align with the holes in the door. Place the
counter-beater O-ring into the groove on
rear pin of the freezer door.
Summary of Contents for 0738
