Taylor-Dunn RE-380-36, Service And Replacement Parts Manual, Page: 31 / 150

Front Axle
Page 31
MR-380-05
RE-380-36 & RE-380-48
INSTALL
1: Raise the front of the vehicle and support with jack stands.
2: Install the front axle in reverse order of removal.
NOTE: Use all new cotter pins.
NOTE: Refer to the Replacing the Ball Joints section for information regarding the installing the ball joints
or rod ends.
NOTE: Refer to Tires and Wheels section for information regarding removing the front wheels.
3: Realign the front wheels. Refer to Steering Component Service section for information regarding realigning
the front wheels.
4: If equipped with front brakes, bleed the brakes. Refer to Brake Service section for information regarding
bleeding the brakes.
5: Lower the vehicle.
6: Reconnect the main positive and negative cables at the batteries.
7: Remove the blocks from behind the wheels.
8: Release the park brake and test drive the vehicle.
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
WARNING