Taylor-Dunn RE-380-36, Service And Replacement Parts Manual

Page: 26 / 150

Lubrication
Page 26
RE-380-36 & RE-380-48
MR-380-05
LUBRICATION AND FLUIDS CHART
Assembly Component # Capacity Lubricant
Front Axle:
3: Ball Joint 4 - NLGI Grade 2 lithium multi-purpose grease
5: Wheel Bearing 2 - NLGI Grade 2 lithium high temp Bearing Grease
2: King Pin 2 - NLGI Grade 2 lithium multi-purpose grease
Brake Fluid:
Master Cylinder 1 DOT 3, Meets or exceeds SAE J1703
Linkages:
Brake linkage 3 - Multi-purpose spray lubricant
Rear Transaxle:
7: Drain Plug (ref)
8: Level Plug (ref)
9: Fill Plug (GT) 1 1.4-1.9 Liters SAE 80W90 Gear Oil
9: Fill Plug (SD) 1 1.4 Liters SAE 80W90 Gear Oil
10: Motor Coupler 1 Part # 94-421-34 Moly Paste Grease
11:Fill/Level (SD Axle) 1 0.75 Liters SAE 80W90 Gear Oil
HAZARDOUS WASTE DISPOSAL
This vehicle contains various components and/or fluids that may be classified as hazardous waste.
This includes but is not limited to Lead, Acid, Oil, Grease.
The brake linings originally installed by the factory do not contain asbestos. However, since it is possible that
asbestos brake linings were installed as replacement parts, brake linings should be handled as hazardous
waste.
The requirements for disposal of hazardous waste vary by location. Consult your local regulations regarding
the proper disposal of hazardous waste products.