Taylor-Dunn RE-380-36, Service And Replacement Parts Manual, Page: 113 / 150

Replacement Parts
Page 113
* Not available at time of printing
MR-380-05
RE-380-36 & RE-380-48
Axle Assembly, Front
Item No. Part No. Description Qty
1 14-380-80 Yoke, Left Side, Without Brakes 1
14-240-08 Yoke, Left Side, Use with Disc Brakes 1
2 15-380-33 Front Axle Beam 1
3 80-309-10 Bearing Pack 2
4 88-289-81 Nut 2
5 80-103-00 Bearing Race 2
6 88-239-85 3/4”NF, Slotted Nut 2
7 92-104-00 Dust Cap With Grease Fitting 2
92-104-01 Dust Cap Without Grease Fitting Use with Disc Brakes 2
8 88-527-11 1/8” X 1” Steel Cotter Pin 2
9 80-017-00 1” Bearing 4
10 12-124-00 Hub, W/O Disc(Standard Axle W/O Brakes) 2
11 45-338-00 Seal 2
12 14-380-81 Yoke, Right Side, Without Brakes 1
14-240-07 Yoke, Right Side, Use with Disc 1
13 21-009-10 King Pin 2
14 12-158-10 Hub, Use with Disc Brakes 2
15 32-200-00 King Pin Bushing 2
16 32-204-00 King Pin Bushing 2
Axle Shaft Assembly, Rear
Item No. Part No. Description Qty
1 41-154-20 Axle shaft 2
2 80-505-20 Bearing 2
3 41-490-11 Disc brake rotor 2
4 41-172-21 Hub 2
5 88-268-63 Flat washer 2
6 88-268-30 7/8-14 x 1.5 Bolt, grade 5 2
7 96-329-10 Wheel stud 10
Not 92-104-10 Hub cover 2
shown 41-290-40 Axle housing, left 1
41-290-43 Axle housing, right 1
89-113-30 M12 x 1.75 x 30mm Hex bolt (axle housing to center section) 6
89-113-60 M12 Split lock washer (axle housing to center section) 6