Taylor-Dunn B 2-48, Operation, T Roubleshooting And Replacement Parts Manual

Page: 18 / 232

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules Page 4
DRIVER TRAINING PROGRAM
According to ANSI B56.8, the owner of this vehicle shall conduct an Operator Training program for all
those who will be operating this vehicle. The training program shall not be condensed for those claiming
to have previous vehicle operation experience. Successful completion of the Operator Training program
shall be required for all personnel who operate this vehicle.
The Operator Training program shall include the following:
•
Operation of this vehicle under circumstances normally associated with your particular
environment.
•
Emphasis on the safety of cargo and personnel.
•
All safety rules contained within this manual.
•
Proper operation of all vehicle controls.
•
A vehicle operation and driving test.
Driver Qualifications.
Only those who have successfully completed the Operator Training program are authorized to drive this
vehicle. Operators must possess the visual, auditory, physical, and mental ability to safely operate this
vehicle as specified in the American National Standards Institute Controlled Personnel and Burden
Carriers ANSI B56.8.
The following are minimum requirements necessary to qualify as an operator of this vehicle:
•
Demonstrate a working knowledge of each control.
•
Understand all safety rules and guidelines as presented in this manual.
•
Know how to properly load and unload cargo.
•
Know how to properly park this vehicle.
•
Recognize an improperly maintained vehicle.
•
Demonstrate ability to handle this vehicle in all conditions.
T
A Y
L OR - DU N
N
T
he
B
e
st
W
ay
To
Go About
Yo
ur
Bu
si
n
e
ss
R