Tayana VANCOUVER 42, Operation And Maintenance Manual

Page: 17 / 70

18
9. Launch and inspect all underwater fittings for leaks.
10. Fill fuel, water, and propane tanks and search for leaks. Ensure that there are no leaks in propane
tank storage compartment. Adding water to compartment and looking for leaks may be necessary.
11. Install pulpits, stanchions, lifeline lines, safety lifeline ends and gates.
12. Install standing and running rigging on mast.
13. Install antennas and other electronics on masthead. Check mast wiring and lights.
14. Step mast, set up and adjust rig, pin and tape all turnbuckles, check halyards.
15. Reeve sheets, bend on and hoist sails, furl sails.
16. Align engine to .002" max. clearance.
17. Check oil and water level in engine.
18. Complete installation of owner or dealer supplied equipment.
19. Check battery condition and recharge if necessary.
20. Check engine operation.
Note: Carefully read your engine manual before operating your engine. Do not let the engine idle for
an extended period during break-in period.
21. Check operation of all systems and equipment.
22. Check all doors and drawers for proper movement and secure latching.
23. Water test decks, fittings, and ports and search for leaks.
24. Sea trial under power and sail.
25. Re-check for leaks in interior plumbing systems (fuel, water, and waste) and exterior hardware.
26. Clean interior and exterior of yacht thoroughly.