TAUSANA TWIST, User Manual

Page: 13 / 56

13
EN
TWIST
Turning the device on with the button
will result in the radiator heating up to
the set temperature. After reaching the
set temperature the device will turn off
and on regularly in order to maintain the
set temperature.
The construction of the device as well as
the physical characteristics of the heat -
ing agent inside the radiator, influence
the way in which the heat is distributed
— the temperature of the bottom pipes
on the radiator (especially the two lo -
cated at the very bottom of the radia -
tor), may be lower than the temperature
of the remaining parts of the radiator —
this is a normal phenomenon.
TEMPERATURE INCREASE
In order to increase the temperature
of the radiator, press once or sever-
al times as required; the correct num -
ber of diodes will start blinking. The last
blinking diode indicates the set temper -
ature, whilst the last diode which shines
constantly, indicates the current tem -
perature. The remaining diodes will start
shining constantly on reaching subse-
quent temperature levels.
TEMPERATURE DECREASE
In order to decrease the temperature
of the radiator, press once or several
times as required; the correct number of
diodes will start blinking. The last diode,
which shines continuously, indicates the
set temperature whilst the last blinking
diode indicates the current temperature.
The remaining diodes will start fading on
reaching subsequent temperature levels.
dryer function
turn on/off button
temperature regulation