TAUSANA TWIST, User Manual

Page: 7 / 56

7
EN
Electric Heating Element
Safety requirements — installation
1. Fitting and connection of the heating element should
only be performed by a qualified installer.
2. Connect the unit to a sound electrical installation (see
the ratings on the heater).
3. Switching on the heating element in the open air to test
the device is permitted for a maximum of 3 seconds.
4. Never test a heating element that is already installed. Do
not turn the heating element on in an empty radiator!
5. Ensure that the power cord does not touch the hot parts
of the heating element or radiator.
6. Before installing or removing the device, make sure it is
disconnected from the power source.
7. Do not open the device — any interference with internal
components will invalidate the warranty.
8. The heating element’s power output must not exceed the
radiators power output for the parameters 75/65/20° C.