111
18
X10.5
Step 8:
Adjusting the feet
The crosstrainer can be stabilised on un-even surfaces with the adjustable feet.
1. Lift up the crosstrainer on one side to gain access to the adjustable feet underneath the frame.
2. Turn the screw clockwise to unscrew the foot, lifting the crosstraining at that point.
3. Turn the screw anti-clockwise to lower the crosstrainer at that point.
Step 9:
Connecting the equipment to the mains supply
࣑
ATTENTION
The equipment must not be connected to a power board, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
L
NOTICE
The mains plug should only be used if the battery charge is insufficient.
Connect the adaptor (120) to the unit and then plug the adaptor (120) into a wall socket that complies
with the specifications in the chapter on electrical safety.
The adaptor included in the package is used to charge the battery, which is installed inside the
console.
Please notice the following precautions, otherwise the performance of the battery may decrease:
1. If the battery is fully discharged, it must be recharged for 8 to 10 hours.
2. If the battery is partially discharged, it must be charged for 1 to 4 hours.
3. If you do not plan to use the device for a longer period of time, charge the battery completely
before storing the device.
4. The fully charged battery must be recharged after one month of storage.
Summary of Contents for TF-X105-2
