Taurus T10.5 Pro, Assembly And Operating Instructions Manual

Page: 23 / 64

T10.5PRO
23
TIME
Count up: If no target time was selected, the TIME will count up
from 0:00 to a maximum of 99:99 minutes.
Count down: If you entered a target time (10:00 to 99:00; 1 min.
increments), the console will count down from the selected time
to 0:00.
INCLINE
Press INCLINE up or DECLINE down in order to increase or decrease
the incline from 0% to 15%; 1% increments.
SPEED
Press SPEED (+) or SPEED (-) in order to increase or decrease
the speed from 0.8 to 25 km/h/0.5 to 15 mph; 0.1 km/h/mph
INCREMENTS.
PULSE
Wear a compatible chest strap or grab the hand pulse sensors
with both hands. Your pulse will be displayed after a few seconds.
If you do not wear a compatible chest strap or your hands do not
correctly grab the sensors and a few seconds pass without a pulse,
the console will turn off the pulse circuit. The console will then
show the error message “P”. If you grab the pulse sensors correctly
again with both hands, the pulse will be displayed.
AGE
During setting, the value here stands for “AGE”. Please look at each
instruction from the console programs for detailed information.
Display range: 10 to 99 years; 1 year increments.
NOTE: Even though the console allows a minimum age of 10 years,
the equipment is not recommended for usage by children.
CALORIES
Indicates the estimated number of calories burnt.
WEIGHT
During setting, the value here stands for “WEIGHT”. Please look
at each instruction from the console programs for detailed
information.
30 to 180kg/40 to 400 lbs; 1 kg/lbs increments; After you pressed
ENTER to confirm the desired value for WEIGHT, the desired value
for WEIGHT will become a “default” when the user starts again.
DISTANCE
The distance is calculated based on your speed.
Turn on
a. Make sure that the power cable is inserted correctly in an outlet.
b. Turn on the main power switch located in the front on the treadmill.
c. Insert the safety key to turn on the console.
Turn off
After 20 minutes of no usage, the console will automatically change into SLEEP MODE.
Press any button to turn the console back on.