Taurus T10.5 Pro, Assembly And Operating Instructions Manual

Page: 20 / 64

T10.5PRO
20
Step 4: Assembly of the console
Note: The handrail assembly (9), rear console cover (48) and two bolts (M5x15mm)
(88) are pre-mounted together.
a. Remove the rear console cover (48) from the handrail assembly (9) by loosening
and removing the two bolts (M5x15mm)(88).
Note: Four nylon nuts (M10xp1.5)(115) are already pre-mounted on the backside of
the handrail assembly (9).
b. Pay attention to FIG. B (see below) and remove the four nylon nuts (M10xp1.5) (115)
from the handrail assembly (9).
c. Connect the middle front handle cable (124) with the upper front handle cable
(123). Do not bend the cable.
d. Connect the middle handle cable (126) with the upper handle connecting cable
(125). Do not bend the cable.
e. Connect the middle connecting cable (118) with the upper connecting cable (117).
Do not bend the cable.
f. Connect the ERP middle connection cable (180) to the ERP upper connection cable
(179). Do not bend the cable.
g. Pay attention to FIG. B. and mount the console (46) on the handrail assembly (9)
with four nylon nuts (M10xp1.5)(115) and four bolts (M5x15mm)(88).
h. Mount the rear console cover (48) on the console (46) with two bolts (M5x15mm)
(88).