Taurus T10.5 Pro, Assembly And Operating Instructions Manual

Page: 16 / 64

T10.5PRO
16
Drawing Part no. and description Qty.
75) Spring washer (M10) 4
76) Bolt (M5x15mm) 16
102) Bolt (M10x20mm) 4
105) Bolt (M10x65mm) 2
115) Nylon nut (M10xp1.5) 2
Screwdriver 1
Allen wrench (6mm / 8mm) 1
T-hand socket wrench (17mm) 1
Tools and screw sets
3.2 Assembly instructions
Before starting assembly, look carefully through the individual assembly steps shown
and assemble the equipment in the order indicated.
Step 1: Assembly of the console mast
Note: Two nylon nuts (M10xp1.5)(115) were pre-mounted on each front side of the
frame (2); a total of four nylon nuts (115) are pre-mounted.