Taurus T10.5 Pro, Assembly And Operating Instructions Manual

Page: 31 / 64

T10.5PRO
31
COMMENT on TIME
Count up:
If no target time was selected, the TIME will count up from 0:00
to a maximum of 99:99 minutes.
Count down: If you entered a target time, the console will count down from
the selected time to 0:00.
ENTER:
Press ENTER in order to confirm the TIME.
CALORIES lights up. Now the word means “WEIGHT”. After this, the main LED window
will display the notification “ADJUST BODYWEIGHT THEN PRESS ENTER MODE”.
Select WEIGHT (30 to 180 kg/40 to 400 lbs; 1 kg/lbs increments) with INCLINE up or
DECLINE down / SPEED (+) or SPEED (-).
COMMENT on WEIGHT
30 to 180 kg/40 to 400 lbs; 1 kg/lbs increments; The equipment is not recommended
for usage by children.
If you confirmed the desired value for WEIGHT with ENTER, this desired value for
WEIGHT will become the “default” when the user restarts the program.
ENTER: Press ENTER to confirm the WEIGHT.
SPEED lights up.
Select the max. SPEED 5 (5 to 25 km/h/3 to 15 mph; 0.1 km/h/mph increments) with
INCLINE up or DECLINE down / SPEED (+) or SPEED (-).
ENTER:
Press ENTER to confirm the SPEED. Make sure that the TIME, WEIGHT and
SPEED were entered correctly.
START: Press START to start the training.
“3 2 1 GO” appears on the main LED window as the countdown for your workout. After
a long beep, the 5K RUN/3.1 MILE PROGRAM will appear in the main LED window.
5k RUN (P3) Comment on the manual during the workout
No pulse signal
You must either wear a compatible chest strap or grab the pulse sensors on the
handles. Your pulse will be displayed after a few seconds.
If you do not wear a compatible chest strap or your hands do not correctly grab the
sensors and a few seconds pass without a pulse, the console will turn off the pulse
circuit. The console will then show the error message “P”.
If you place your hands on the pulse sensors again, the pulse display will light up
again.