socket.
TIPS:
- If you want to vacuum up a large quantity of liquid
from a sink or tank, please don't put the entire suc-
tion nozzle inthe liquid; rather leave a little space so
that some air can also be drawn in along with the
liquid.
- The appliance is equipped with a float switch that
will stop the vacuuming when the tank is full.
- Be aware that the full tank can be very heavy.
IMPORTANT:
•After wet vacuuming, switch off the appliance and
unplug it. Empty the tank and clean/dry it inside and
outside before putting it away. Do not store the appli-
ance with water inside the tank.
•Please note the maximum water capacity is 15
Litres.
3.2.3. Using the microparticle filter
3.2.3.1. When using the microparticle filter, no dust
bag is needed.
3.2.3.2. Place the microfilter on the filter basket from
the top, turn the filter cap to secure it in place.
3.2.3.4. After each use, clean the microparticle filter
by tapping or brushing the dust out.
3.2.4. Operating the vaccum:
3.2.4.1. Unwind the power cord from the cord stor-
age and plug into the mains power socket.
3.2.3.2. Switch the vacuum cleaner ON by pressing
the ON/OFF switch.
3.2.4.3. A suction regulator can be found on the
hose handle. To activate simply slide the regulator
open to reduce the level of suction required.
3.2.4.4. The suction power will reduce and stop as
the drum fills up. It is recommended to empty the
drum on a regular basis.
3.2.4.5. To switch the vacuum OFF depress the ON/
OFF switch again and then remove from remove the
plug from the mains power socket.
3.2.5. Using the blower function.
3.2.5.1. Unwind the power cord from the cord stor-
age.
3.2.5.2. Attach the flexible hose to the blow outlet.
3.2.5.3. Switch the vacuum cleaner ON by pressing
the ON/OFF switch.
3.2.5.4. To switch the vacuum OFF depress the ON/
OFF switch again and then remove from remove the
plug from the mains power socket
3.3 Once you have finished using the appliance:
3.3.1. Allow appliance to cool down.
3.3.2. Unplug the appliance from the mains power
supply.
3.3.3. Clean the appliance as described in the clean-
ing section.
4. Cleaning
4.1. Disconnect the appliance from the mains power
supply before undertaking any cleaning task.
4.2. Open the tank.
4.3. Take out the dust filter.
4.4. Empty the tank.
4.5. Wash off the dust filter with clean water.
4.6. Ensure the dust filter dries completely.
4.7. Clean the outer parts of the appliance with a
damp cloth with a few drops of washing-up liquid
and then dry. CAUTION! Do not immerse electrical
parts of the appliance in any liquid.
4.8. Do not use solvents, or products with an acid
or base pH such as bleach, or abrasive products, for
cleaning the appliance.
4.9. Never submerge the appliance in water or any
other liquid or place it under running water.
5. Anomalies and repair
5.1. Take the appliance to an authorised support
centre if product is damaged or other problems
arise.
5.2. If the connection to the mains has been dam-
aged, it must be replaced and you should proceed as
you would in the case of damage.
