Tatung TDR-22 Series, Installation And Operation Manual

Page: 24 / 64

TATUNG TDR series Digital Recording System Page
20
3.6 P/T/Z Protocol
This function button (as shown below) is used to setup P/T/Z Protocol.
Please select the same protocol as that of your camera.
EXIT
You may click any other icon to exit Protocol Setup Mode and go directly into
other setup mode. Click EXIT button to go back to Watch Mode.
Click on this button to setup the P/T/Z Protocol, the screen display as the
below
Click to choose a
manufacturer
brand from a
drop-down list
Click to assign a
communication
port.
Choose the number
here to control the
camera address
more than 16
Note: When complete the
setup and exit to the LIVE
mode, the system will
spend about 20 second to
compensate and install
the new setting. This
operation may cause the
image of the cameras
stop motion or
discontinuous motion.
The recorded data also
have the same effect.