Tatung TDR-22 Series, Installation And Operation Manual

Page: 18 / 64

TATUNG TDR series Digital Recording System Page
14
4. Activate the camera
Click the camera icon to activate the camera(s) which will be used in this group.
5. Select the Recording mode
Select the recording mode for each channel. There are three recording modes.
6. Setup Alarm Out: Alarm Output may be setup when either a sensor is triggered
or motion is detected.
7. Set up another group
Repeat the step from 1 to 6 if you want to set up another group.
8. Exit
You may click any other icon to exit Schedule Setup Mode and go directly
into other setup mode. Click EXIT button to go back to Watch Mode.
DEFAULT Continuous recording
Motion
Record while motion detected
Sensor
Record while Sensor is active
Note: When complete the
setup and exit to the LIVE
mode, the system will
spend about 20 second to
compensate and install
the new setting. This
operation may cause the
image of the cameras
stop motion or
discontinuous motion.
The recorded data also
have the same effect.