Tatung TDR-22 Series, Installation And Operation Manual

Page: 13 / 64

TATUNG TDR series Digital Recording System Page
9
CHAPTER 3: SETUP MODE
The first screen of the setup mode will be the channel setting screen displayed below
The control buttons contained in the main screen are as described below:
1. Channel
Click to setup the channel and channel (OSD) name. There are two
different ways to setup the channel: automatically scan or manually
designate. You may also set the name for each channel.
2. Schedule
Click to setup the recording schedules. There are 16 recording groups and
three recording modes (continuous, motion, sensor) that may be separately
set up for your application. Alarm outputs can also be set up separately.
3. Speed
Click to setup the recording speed and other options. The recording speeds
include speeds on normal, motion, and sensor recording. You can also set
up the time delay for the display sequence as well as pre alarm, pre motion
and post alarm, post motion recording in this mode.
4. Color
Click to adjust the image attributes including the adjustment of Brightness,
Contrast, Color (saturation), and TINT for each individual channel.
5. Motion
Click to setup the motion function. You can set up each individual
channel’s motion detection area (up to 10 zones for each channel),
sensitivity, and beep time for motion detection.
Note : For TDR-2209, CH 10 to
CH 16 will be empty by the
factory’s setting. For TDR-2204,
CH 05 to CH 16 will be empty by
factory’s setting