34
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GCRO 7010 / GCRO 7012
OPERATIONS - Important points
• Tighten nuts and bolts after the first day of service, and check the conditions
of all pins and cotter. Then retighten every 24 operating hours.
• Special attention should be given to the sections of discs, retightening daily
during the first week of use. Then tighten periodically.
• Look carefully at the lubrication intervals.
• Choose a gear that allows the tractor to maintain certain power reserve,
ensuring against unforeseen efforts.
• Speed is relative on the march of the tractor and can only be determined
by local conditions. We adopted an average 5.0 to 7.0 km / h, which is not
advisable to overcome to maintain service efficiency and avoid possible
damage to equipment.
• When performing maneuvers on the headland, operate before the hydraulic
cylinder gradually raising the disc sections
• The grillage ground is always on the left side of the operator.
• The grid drive to open or close the sections should be made gradually, with
the moving tractor.
• Do not check any leaks with hands, because high pressure can cause injury.
Use cardboard or other suitable object.
• Relieve command pressure before disconnecting the quick couplers and when
doing any verification in the hydraulic cylinder.
• The tractor drawbar must remain loose at work and fixed on shipping.
• Durante o trabalho ou transporte não é permitida a presença de passageiros
no trator ou equipamento.
• As previously mentioned the GCRO harrows 7010 and 7012, have several
settings, however, only the local conditions can determine the best adjustment
thereof.
Adjustments and operations
