1
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GCRO 7010 / GCRO 7012
Introduction
The grids Remote Control Offset, GCRO model 7010 and 7012 GCRO
are specially designed for large areas. It is ideal for primary tillage
or leveling with excellent application on soil preparation for annual or
perennial crops.
The structure of sturdy and appropriate frame, is made of folded steel
plates joined by a good penetration and fine finish with resilient parts
in the load concentrations.
Have efficient Shooting system with hydraulic drive for depth control
and safe transport over long distances, this system also streamlines
Shooting maneuvers during service.
This instruction manual contains the information necessary
for the best performance of the scraper. The operator must
carefully read the entire manual before putting the equipment
into operation. Also must make sure of safety recommendations.
For any further clarification, or in the event of technical problems
that may arise during the service, consult your reseller,together
with the Technical Support department of the factory, ensures
the fully functioning of your TATU harrow.
