30
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GCRO 7010 / GCRO 7012
The cutting depth is regulated in two ways:
1) Opening of disc sections.
Increases the opening angle between the sections to work on land with more difficult
of penetration of the discs. In light and loose soils should work with smaller opening angle.
This adjustment is made by changing the setting of the chassis door-drives in the
main frame.
Adjustments and operations
Depth of cut
To control the depth through the tires, it is used the travel limit (A) which are placed on
the stems of the cylinders, yielding numerous adjustments of the depth of cut of the discs.
A
A
Front section
Greater depth
Less depth
Greater depth
Less depth
Rear section
