18
3
CE CONFORMITY DECLARATION
Ref. No. 58.RT.01.2007/1/B
We,
ZAK
Ł
AD ELEKTRONICZNY TATAREK Jerzy Tatarek
75 Swieradowska St. , 50-559 Wroclaw
declare under our sole responsibility that
the product: Regulator of heating system with solar collector
model: RT-08, RT-08K, RT-08P, RT-08G, RT-08G-BUF
PN-EN 55022: 2000 -
(EMC)- IT devices
Characteristics of radioelectric noises. Acceptable levels and measurement methods
:
Laboratory IASE 51-618 Wroclaw, 1 Wystawowa st.
Test report No.
39/DL/I/07 of 22.06.2007
41/DL/I/07 of 03.07.2007
Place of issue:
Manufacturer representative:
Wroclaw
Miros
ł
aw Zas
ę
pa
Date of issue:
Position:
08.2007
Konstruktor
is in conformity with the basic requirements included in Directive EMC 2004/108/WE of 15.12.2004 (the
electromagnetic compatibility law of 13.04.07) and Directive LVD 2006/95/WE of 21.08.07 (Laws Journal
of 2007 No. 155 pos. 1098) regarding the requirements for electric devices.
To the conformity evaluation the following harmonized standards were used:
PN-EN 60730-2-1: 2002 -
Automatic electric regulators for house usage and the like. Part 2-1:
Specific requirements regarding electric regulators for electric house
devices
PN-EN 60730-1: 2002 -
Automatic electric regulators for house usage and the like.
Part 1: General requirements.
Electromagnetic compatibility
Complementary information
Electronic Engineering Plant TATAREK
has initiated management system and complies with the following standard :
ISO9001: 2000 CERTIFICATE No. 133/2004 of 01.2004
Polish Foreign Trade Chamber
The last two digits of the year in which the CE marking was affixed: 07
Fig. 1b Alternative operation diagram of the buffer type COMBO, that is, the WAW container is
included in the buffer.
FIREPLACE
WAW
CH
CH= Central Heating
WAW=Warm Applicable Water
WAW
Warm Applicable Water container (boiler)
FIREPLACE
Water jacket fireplace
BUF
Buffer container
CH
Central heating system
T1
Temperature sensor of the buffer container
T2
Temperature sensor of the WAW container
T3
Temperature sensor of the fireplace water jacket
P1
Pump loading the WAW from fireplace
P2
Pump loading the buffer container
P3
Circulating pump CH
PP
Electronically controlled choke valve of the fireplace
!
In case of using the COMBO buffer (the WAW is inside the buffer) you need to change the
<93> BUFFER COMBO to ON because for such a configuration the loading pump of the WAW
receives heat from the fireplace and not from the buffer (see fid.1)
2.1
C
hoke valve operation
The choke valve regulates an air supply to the combustion chamber, which allows the temperature of
the fireplace water jacket to be kept at the preset value. The task is realized by comparing the
temperature of the water jacket(T3) and preset temperature (the <20>
parameter) and then by gradual opening/shutting the choke valve. The change of the choke valve
position is done every 20secs
The shutdown of the RT-08G-BUF control unit automatically causes the choke valve to be set at the
rest position defined by the <50>
parameter (Default setting is 0% - full shut-
off).
”FIREPLACE Temp.”
ChokeV State OFF
