10
11
Icon of the
current mode
Selection of the mode
from the list (+/-)
Screen of the clock
Screen of pumps operation for the basic operation configuration
It
’
s a stable state, that is, in order to change it you need to press the CHOOSE button (7)
enables changing the operation mode of the fireplace and WAW
container.
Possible operation modes of the fireplace are as follows (described above):
Possible operation modes of the WAW container are as follows (described above):
Screen of the operation modes
MAN/OFF/AUTO/ON
OFF/SUMMER/ON/PRIORITY/CLOCK/SPECIAL
The screen shows the current time and the number of the activated time zone.
Time correction is possible after pressing the CONFIRM button (6) and the minutes field begins
blinking. The blinking value can be altered with the buttons
“
+
”
or
“
-
”
Pressing the CHOOSE
button (7) you come to the hours field that can be set also with the buttons
“
+
”
or
“
-
”
.
Pressing the CONFIRM button (6) confirms the changes (the clock field will stop blinking).
Normally the
equals to
“
0
”
namely the parameters aren
’
t available.
After changing the level to
“
1
”
,
“
2
”
,
“
3
”
or
“
4
”
successive screens show the values of the
parameters.
The last screen contains
“
****
”
after which it comes back to the above mentioned screens.
Screen of setting the parameters
parameters level
Screen of pumps operation for the alternative run configuration BUFFER COMBO
Temperature
of the water jacket of
the fireplace (T3)
WAW pump
doesn
’
t run
T1 - temperature
of the buffer
State of
the CONTROL relay
Operation mode
of the WAW
Time
zone
Current
time
BUF pump runs
CH pump
runs
T2 - temperature
of the WAW
PARAMETERS
Parameter
name
Unit
Upper and
lower thershold
of the changes
Parameter value
(change with +/-)
!
PARAMETERS ADJUST THE CONTROL UNIT TO THE PROPERTIES OF
THE FIREPLACE AND CENTRAL HEATING SYSTEM. THEIR CHANGE
OUGHT TO BE CONSULTED WITH THE FIREPLACE PRODUCER.
ILL-CONSIDERED MODIFICATIONS CAN CAUSE UNSTABLE AND
INEFFICIENT OPERATION OF THE SYSTEM
