manualshive.com logo in svg

TATA Motors Indigo eCS, Owner'S Manual & Service Book

Share
Download
TATA Motors Indigo eCS Owner'S Manual & Service Book Download Page 96

94

STARTING & DRIVING THE CAR

FUEL ECONOMY

MPFI System :

NOTICE

The multi point fuel injection system has been designed
to meet various load and speed conditions of the engine
and doesn't require any regular maintenance. MPFI
system should be serviced by Authorised Service
personnel only, if required.

TIPS RELATED TO FUEL SYSTEM MAINTENANCE
(MPFI) :

Basically, the fuel system of the vehicle consists of the
following main components :

1. Fuel tank    2. Fuel Filter      3. Fuel Pump    4. Fuel Rail

5. Fuel pressure regulator and  6. Fuel injector.

The following instructions are to be followed for reducing
problems related to the fuel system.

a) Avoid keeping the fuel tank empty and preferably keep

it topped up as frequently as possible.

NOTICE

NOTICE

Empty fuel tank may lead to inner corrosion of the tank.
The rust particles thus formed may result in frequent
clogging of fuel filters. If the rust particles enter the
system, it may result in malfunctioning of the MPFI
system.

b) Replace clogged fuel filters to prevent inconsistent fuel

delivery from the fuel pump.

Summary of Contents for Indigo eCS







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands