manualshive.com logo in svg

TATA Motors Indigo eCS, Owner'S Manual & Service Book

Share
Download
TATA Motors Indigo eCS Owner'S Manual & Service Book Download Page 157

155

IMPORTANT INFORMATION

SERVICE INSTRUCTIONS

SERVICE INSTRUCTIONS :

To achieve economical and trouble free performance,  please follow the
instructions as stated.

YOUR CAR IS ENTITLED TO FOUR FREE SERVICES (LABOUR ONLY).
THE FREE SERVICE COUPONS ARE ATTACHED TO THE SALES INVOICE.
PLEASE PRESENT THESE COUPONS TO THE SERVICING DEALER WHILE
AVAILING FREE SERVICES.

1

st 

 free service

-

At 1000-1500 km. OR 1 month whichever is eariler

2

nd 

 free service

-

At 5000-5500 km. OR 6 months whichever is eariler

3

rd 

 free service

-

At 10000-10500 km. OR 12 months whichever is eariler

4

th 

 free service

-

At 20000-20500 km. OR 24 months whichever is eariler

All services other than free services are chargeable.

Servicing of the car can be done at
any 

TATA MOTORS

 Authorised

Dealer Workshop, 

TATA MOTORS

Authorised Service Centre (TASC)
or 

TATA MOTORS

 Authorised

Service Point (TASP

)

. The details

of their locations are given in this
manual.

Warranty claims can be settled by
any Tata Motors Authorised Dealer
for all failures, while all warranty
claims excluding the consideration
on the replacement of major
aggregates, can be settled by any
TASC which is authorised for
handling warranty claims. TASPs
will not handle warranty repairs.

Summary of Contents for Indigo eCS







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands