manualshive.com logo in svg

TATA Motors Indigo eCS, Owner'S Manual & Service Book

Share
Download
TATA Motors Indigo eCS Owner'S Manual & Service Book Download Page 77

75

FRONT SEAT & SEAT ADJUSTMENTS

BEFORE DRIVING

Front Seats and Seat Adjustments :

Front Seats : Both the driver and co-driver seats are of bucket type to
provide maximum riding comfort.

Moving the seats forward and backward :

To adjust the seat position, lift the lever (1)under the seat cushion
front, then move the seat to the desired position and release the
lever.

Make sure the seat is locked in position.

Adjusting the angle of the seat back :

To adjust the angle of the seat back, a lever (3) has been  provided on
the sides of the front seats. By lifting the lever,  you can adjust the
angle of the backrest.

CAUTION

Do not adjust the seat when the car is in motion.

Always adjust the seat back to an upright position and sit well
back in the seat.

Seat height adjusment lever: (if provided)

Front Seats height can be adjusted for better drivability. The lever (2)
provided on the side of the seats has to be manually operated up and
down to adjust the seat height as per need.

1. Lever for seat backward/forward

movement

2. Lever for seat height adjustment

3. Lever for seat back angle

adjustment

3

2

1

Summary of Contents for Indigo eCS







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands