manualshive.com logo in svg

TATA Motors Indigo eCS, Owner'S Manual & Service Book

Share
Download
TATA Motors Indigo eCS Owner'S Manual & Service Book Download Page 9

7

IMPORTANT INFORMATION ABOUT THIS MANUAL

SAFETY SYMBOL

In this manual, you will also see a circle with a slash.  This
means "Do not", "Do not do this", or "Do not let this happen".

SAFETY AND VEHICLE DAMAGE WARNINGS

I

n this manual, you will see 

CAUTION,  NOTICE

 and

WARNING.

CAUTION

This is a warning. May cause injury to people if the
warning is ignored. You are informed what you must or
must not do in order to avoid or reduce the risk to yourself
and other people.

NOTICE

This is a warning. May cause damage to the vehicle or
its equipment if the warning is ignored. You are informed
what you must or must not do in order to avoid or reduce
the risk of damage to your vehicle and its equipment.

WARNING

Indicates a strong possibility of severe personal injury
or death if the instructions are not followed.

Summary of Contents for Indigo eCS







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands