manualshive.com logo in svg

TATA Motors Indigo eCS, Owner'S Manual & Service Book

Share
Download
TATA Motors Indigo eCS Owner'S Manual & Service Book Download Page 127

125

MAINTENANCE & CAR CARE

FUSES & RELAYS

Fuses & Relays :

The electrical circuits in your car have fuses to protect the
wiring from accidental short circuit or sustained overload.
Fuses and relays are located at 3 locations in your car as
shown in the sketch.

Circuit connected through fuses and relays and the
amperage of the fuse is printed on the fuse box covers.

Checking and replacing fuses :

If any electrical unit in your car has stopped functioning,
the fuses should be checked first.

•

Turn the ignition key to 'LOCK' position.

•

Remove the fuse box cover, locate the fuse for the
function.

•

Remove the fuse & look for the fuse element inside the
fuse. If it is damaged replace it with a fuse of same
rating and type. Push the fuse firmly into the holder.

•

Check that all other fuses are firmly in position & fix the
cover back in position. Spare fuses are provided in the
fuse box in the cabin.

If the replaced fuse of the correct rating burns out in short
time, there is probably a serious electrical problem in your
car. Get the car attended to at the nearest Authorised Service
outlet.

If any of the function relays is found defective, replace it by
a genuine relay.

CAUTION

The electrical system is protected by fuses that are
designed to  foil and prevent damage to wiring harness.
Always replace blown fuse with the same rating as
specified to prevent wiring damage that can result in a
possible fire.

1. Engine compartment (Near fire wall).
2. Cabin compartment under

dashboard.

3. Cabin compartment under co-driver's

seat.

4. Near Battery (Maxi fuse box)

1

2

3

4

Summary of Contents for Indigo eCS







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands