Taski swingo XP-R, Instructions For Use Manual

Page: 16 / 18

93
Malfunctions
Malfunction Possible causes Troubleshooting Page
Machine without function cannot be
switched on.
Machine is switched off
• Turn the key
84
Emergency switch is pressed
• Connect the battery switch with the
machine
84
Main fuse is defective
• Check/replace fuse
• Contact your service partner
92
Error code on the display • Contact your service partner 94
Immobilizer activated or fault in the
controls
• Stand on the running board.
Battery discharged or defective, Bat-
tery charger defective
• Load batteries
• Contact your service partner
86
Batteries defective • Contact your service partner
Brush unit or suction unit cannot be
turned off
Error in the electronic system or
in the control panel
• Stop the machine by pressing the
emergency stop button
• Contact your service partner
84
Brush does not rotate
Brush drive switched off • Press Brush button 84
Main fuse is defective • Replace fuse 92
Motor rotates, brush does not
• Drive belt broken
• Contact your service partner
Poor suction performance
Floor remains wet
Drain water is not
absorbed
Suction not switched on • Press suction unit button 84
ECO button pressed • Switch off ECO button 84
Suction hose not connected • Connect suction hose 87
Squeegee not on the floor
• Check squeegee suspension for
functionality
87
Blades worn out
• Replace blades
92
Hose or squeegee clogged (e.g.
pieces of wood, remnants)
• Remove any foreign matter
Suction filter clogged • Remove any foreign matter 84
Suction unit indicator lights up but
vacuum cleaner is not running
• Check fuse and replace it, if nec-
essary
• Fuse is OK, contact your service
partner
92
Suction unit switches off
Recovery tank full
• Drain recovery tank
• Check battery monitoring
• Check fuse
90
Recovery tank contaminated
• Check recovery tank and clean it, if
necessary
91
Insufficient cleaning solvent supply
Cleaning solvent tank empty • Check cleaning solvent tank 90
Cleaning solvent volume set too low • Adjust cleaning solvent volume
with +/- buttons
84
Cleaning solvent button switched off • Press cleaning solvent button 84
Clean intake • Filter