TASCAM DP-03SD
37
6 – Basic Recording
3 Press the F2 (
EXEC
) button to execute the multi-undo and
restore the song state to just after the selected event was
conducted. In this state, the UNDO/REDO indicator lights.
The event information undone through the above operation
is not erased. The unit has simply been returned to a
previous state. On the
HISTORY
screen, a
*
appears next
to the most recent event after undoing.
NOTE
When the
HISTORY
screen is open, the
UNDO/REDO
[HISTORY]
button does not function, so single undo and
redo cannot be used.
CAUTION
• When saving a song, a maximum of 500 operation history
items can be saved with the song data. If the operation
history exceeds 500 items, the oldest events in the history
are erased when the song is saved. These erased events
cannot be restored.
• When the power is turned OFF (STANDBY) the operation
history is completely erased. The operation history is not
restored when the power is turned ON again.
Erasing the operation history
When the power is turned OFF (STANDBY), the operation history
of the currently loaded song is erased (cleared).
When the power is turned ON again, the song last in use is
reloaded in the same state it was in when the power was turned
OFF (STANDBY). The operation history is not restored, however,
so past operations cannot be undone or redone.
NOTE
The operation histories of songs that are not loaded are not
erased when the power is turned OFF (STANDBY).
Using the following procedures, you can also erase (clear)
the operation history of the currently loaded song without
turning the power OFF.
1 Press and hold the UNDO/REDO [HISTORY] button to open
the
HISTORY
screen.
2 Press the F4 (
CLEAR
) button.
A confirmation message appears.
3 Press the F3 (
YES
) button.
Another confirmation message appears again.
4 Press the F3 (
YES
) button to clear the operation history and
erase the unused data.
The Home Screen reopens when this operation completes.
NOTE
To cancel erasing the operation history, press the
F4 (
NO
)
button.
TIP
• If you open the
HISTORY
screen immediately after
erasing the operation history, the event (operation) that
appears is “
0
” (
-START UP-
), confirming that all
operation history has been cleared.
• If you want to keep the operation history even when you
power OFF (STANDBY), turn song protect ON before turning
the power OFF (STANDBY) (see “Protecting songs” on page
32).
CAUTION
You cannot undo erasing the operation history! Only erase it
when you are certain that you want to do so.
