42
TASCAM DP-03SD
7 – Recorder Functions
NOTE
If the current song does not have any location marks, the
location mark list will not open. A “
No Locate Mark
”
pop-up appears briefly and then the
I/O SETTING
screen opens.
3 Use the DATA wheel to select the mark, and press the F4
(
JUMP
) button to locate to the designated point.
Editing IN, OUT and TO points
1 Press the LOCATE LIST [LOCATE SET] button to open the
location mark list.
2 Press the F3 (
POINT
) button to open the
I/O
SETTING
screen.
NOTE
If the current song does not have any location marks, the
location mark list will not open. A
No Locate Mark
pop-up appears briefly and then the
I/O SETTING
screen opens.
3 Use the DATA wheel to select a mark, and press the F2
(
EDIT
) button to open the
I/O SETTING
screen in
editing mode.
4 Use the F3 (
˙
) and F4 (
¥
) buttons to move the time unit
cursor.
5 Use the DATA wheel to change the value of the unit at
the cursor. The larger adjacent time unit will automatically
increase or decrease when a unit is turned past its high or
low limit. For example, when the DATA wheel is turned to
increase the second unit past
59
, it will become “
00
” and
the minute unit will increase by one.
6 Press the F1 (
EXIT
) button when you are done editing
the point to confirm the value and return to the
I/O
SETTING
screen.
7 Press the F4 (
JUMP
) button to locate to the point.
To return to the home screen without locating to the point,
press the F1 (
EXIT
) or HOME button instead.
Using repeat playback
1 Set the starting (IN) and ending (OUT) points for the time
that you want to repeat, and then return to the Home
Screen.
2 Press the REPEAT button to start repeat playback.
The repeat icon on the Home Screen appears.
Repeat icon
Playback starts from the IN point. When the OUT point is
reached, after the repeat interval elapses, playback starts
again from the IN point. Playback continues to repeat
between the IN and OUT points.
3 Press the REPEAT button again to stop repeat playback.
The repeat icon on the Home Screen disappears.
The next section explains how to set the repeat interval that
determines the amount of time until playback starts again after
the OUT point is reached.
Setting the interval between repetitions
The interval can be set from 1.0 to 9.9 seconds.
1 When the recorder is stopped, press the MENU button to
open the
MENU
screen.
2 Turn the DATA wheel to select
PREFERENCE
, and press
the F4 (
¥
) button to open the
PREFERENCE
screen.
3 Use the F3 (
§
) and F4 (
¶
) buttons to select the setting
value for the
Repeat Int
item. Turn the DATA wheel to
set the value from
1.0
to
9.9 sec.
in 0.1-sec. units.
The default setting is
1.0sec
.
4 When finished making settings, press the HOME button to
return to the Home Screen.
